RCAAP Repository

In the past decades, the field of cinema has undergone several transformations. The digital turn increasingly called for new forms of production, distribution, and exhibition, which imply different ways of thinking, doing, and experimenting cinema. These new forms also reduced the gap between cinema to other so-called visual arts. If cinema and visual arts were already in the process of merging, the last years forced the naturalization of thinking in similar theoretical grounds. This special issue aims to be a forum for the discussion of new practices of researching cinema, and the changes in cinema’s forms of experience and production.

La formación de profesionales de la información en Cuba se encauza desde el Departamento de Ciencias de la Información de la Facultad de Comunicación de la Universidad de La Habana. Una aproximación a su contexto histórico permite apreciar la evolución de las concepciones y los diferentes planes de estudios. A partir del 2008, la formación de estos profesionales se estructura y materializa a través del Plan de Estudios D. En este Plan, ocupan un lugar importante la teoría y la visión interdisciplinar. Ello se evidencia, en las relaciones entre disciplinas, la declaración de los propósitos, los autores de referencia, los conceptos básicos y las principales propuestas de las asignaturas asociadas a los fundamentos.

Em vários países, nomeadamente em Portugal, existe uma incidência elevada de erros matemáticos nas notícias de jornais generalistas. De facto, são vários os autores que salientam que a matemática é mal utilizada nas notícias, apesar de ser essencial na atividade jornalística. Este é um problema que, segundo a literatura, se deve também ao baixo nível de numeracia dos jornalistas, que se verifica em consequência da formação que têm. Assim, este artigo tem como objetivo apresentar os resultados de um estudo no qual se analisou a numeracia de alunos de um curso de Ciências da Comunicação. Investigou-se se o nível de numeracia é adequado às necessidades de um jornalista e, além disso, se a formação matemática do curso superior contribui para uma melhoria da aplicação de competências básicas. Os resultados indicam que os níveis de numeracia dos alunos são inferiores ao que é necessário para o trabalho jornalístico e ainda sugerem que a componente curricular matemática do curso não contribui para o aumento do nível de numeracia.

If we trace an archaeological perspective on the history of moving image, we will invariably find innumerable visual devices that both belong to the field of science and that have become popular optical toys. Allowing therefore to put in discussion if the nature of cinematic experience is in fact rooted historically in cinema, since this is a diffuse experience, synthesized in devices that wanted to give back anima to what had previously been fixed in an image. It is for this precise reason that it is particularly pertinent to approach in this context the Werner Nekes' collection of optical devices, because it possesses unique qualities as an archive that condenses the history of visual media, cross-referencing it with visual culture in its popular expression, as well as with the universe of fine arts and contemporary art.

The success of the digital game industry is spawning several undergraduate degrees aiming at the training of digital game developers. Building adequate new courses curricula is not a trivial task and demands a profound analysis of the scientific areas to introduce as well as the dependencies throughout the entire degree. Another important aspect of every academic educational plan are the satellite projects that promote entrepreneurship and provide practical professional experiences to students. This paper presents the main guidelines adopted in the creation of the first digital game development undergraduate degree created in Portugal.

This paper discusses the power of emotions in our health, happiness and wholeness, and the emotional impact of movies. It presents iFelt, an interactive video application to classify, access, explore and visualize movies based on their emotional properties and impact.

The HCI community is actively seeking novel methodologies to gain insight into the user’s experience during interaction with both the application and the content. We propose an emotional recognition engine capable of automatically recognizing a set of human emotional states using psychophysiological measures of the autonomous nervous system, including galvanic skin response, respiration, and heart rate. A novel pattern recognition system, based on discriminant analysis and support vector machine classifiers is trained using movies’ scenes selected to induce emotions ranging from the positive to the negative valence dimension, including happiness, anger, disgust, sadness, and fear. In this paper we introduce an emotion recognition system and evaluate its accuracy by presenting the results of an experiment conducted with three physiologic sensors.

O contributo das redes sociais na luta contra o cancro tem sido conhecida, especialmente, pelo sucesso de movimentos de cidadãos com o objectivo de sensibilizar a sociedade portuguesa para a dádiva de medula óssea. Este tipo de campanhas solidárias, com o apoio dos Novos Media, foi um fenómeno iniciado em 2009 e tem vindo a desenvolver-se, sobretudo, no Facebook. Desde então, novos movimentos têm aparecido regularmente nesta rede social e ajudado a um aumento significativo do registo de dadores. Interessa-nos perceber como se desenvolvem este tipo de campanhas e que factores, contribuíram para o seu sucesso, procurando averiguar não só o poder da Web 2.0, mas também questões sobre a comunicação, a imagem e os media. O sucesso destes movimentos vai muito além da simples presença no Facebook. A análise global do sistema de comunicação é fundamental para compreender o diferente nível de sucesso atingido por cada movimento. No presente artigo, fazemos uma análise comparativa entre os principais movimentos de cidadãos, ocorridos entre 2009 e 2011, que comprova as supracitadas hipóteses.

Neste artigo procuramos averiguar a relevância que as marcas e identidades têm nas plataformas participativas no contexto da saúde, em particular na oncologia. Apesar de estas plataformas disponibilizarem aos cidadãos e instituições as mesmas ferramentas, a sua capacidade de mobilização não é a mesma. As instituições parecem ter maior facilidade, mas nem sempre tal acontece. Discutir o conceito de marca e de identidade contribuirá para responder a esta questão, bem como compreender porque é que as diferenças entre os cidadãos e as instituições se podem atenuar nos novos media. Baseamos a nossa análise na observação de páginas do Facebook, de instituições oncológicas e de grupos de apoio de cidadãos; num conjunto de entrevistas a doentes e familiares oncológicos; e em diferentes estudos na saúde. No fim, procura-se esclarecer a importância do estudo das marcas e da identidade, como possível directriz de novas soluções nos media participativos, que contribuam para atenuar o problema individual do cidadão que se relaciona com o cancro.

The goal of the present study is mapping the nature of possible contributions of participatory online platforms in citizen actions that may contribute in the fight against cancer and its associated consequences. These platforms are usually associated with entertainment: in that sense, we intent to test their validity in other domains such as health, as well as contribute to an expanded perception of their potential by their users. The research is based on the analysis of online solidarity networks, namely the ones residing on Facebook, Orkut and the blogosphere, that citizens have been gradually resorting to. The research is also based on the development of newer and more efficient solutions that provide the individual (directly or indirectly affected by issues of oncology) with the means to overcome feelings of impotence and fatality. In this article, we aim at summarizing the processes of usage of these decentralized, freer participatory platforms by citizens and institutions, while attempting to unravel existing hype and stigma; we also provide a first survey of the importance and the role of institutions in this kind of endeavor; lastly, we present a prototype, developed in the context of the present study, that is specifically dedicated to addressing oncology through social media. This prototype is already available online at www.talkingaboutcancer.org, however, still under development and testing. The main objective of this platform is to allow every citizen to freely build their network of contacts and information, according to their own individual and/ or collective needs and desires.

"Bruno Aleixo" is a viral animation character, created by the Portuguese collective GANA, that surfaced online in 2008. Their animation works have meanwhile crossed onto the most diverse media, and have been branching out in multiple webs of narratives, constantly referring to each other, as well as constantly quoting disparate references such as film classics, chatrooms and TV ads for detergents. This paper attempts a triple analysis of this object of study: the ways in which technology has been fostering non-linear narratives while widening the available aesthetic spectrum, the ways in which processes of cultural consumerism are being reinvented in light of the web 2.0, and the use of "pseudo-nonsense" as a process of oblique cultural psychoanalysis. We will further attempt to demonstrate how new media and web networks have been contributing to a fragmentation of audiences, as well as a blurring between dominant cultures and sub-cultural phenomena; and we will end by positing that the structural principles behind the "Bruno Aleixo" series can be applied in social and cultural contexts situated at the opposite end of the spectrum of traditional expectations regarding Animation.

The construction sector has one of the worst occupational safety and health records in Europe. The costs of this scenario are very high, namely costs for workers and their families, costs to organizations, resulting from the absence of workers due to illness, insurance premiums, costs resulting from reduced productivity, cost of replacement and training of workers, etc., and costs to society, which in turn increases the costs of health systems. This paper presents and discusses the development of a methodology for economic evaluation in the context of risk management, which will allow senior management to support decision making. The possible application of this methodology to the construction sector is discussed.

Poly(vinylidene fluoride-trifluoethylene) electrospun membranes were obtained from a blend of dimethylformamide (DMF) and methylethylketone (MEK) solvents. The inclusion of the MEK to the solvent system promotes a faster solvent evaporation allowing complete polymer crystallization during the jet travelling between the tip and the grounded collector. Several processing parameters were systematically changed to study their influence on fiber dimensions. Applied voltage and inner needle diameter do not have large influence on the electrospun fiber average diameter but in the fiber diameter distribution. On the other hand, the increase of the distance between the needle tip to collector results in fibers with larger average diameter. Independently on the processing conditions, all mats are produced in the electroactive phase of the polymer. Further, MC-3T3-E1cell adhesion was not inhibited by the fiber mats preparation, indicating their potential use for biomedical applications.

It is shown that electrospun poly(vynilidene fluoride) nanofibers are fully poled right after preparation and show b-phase contents of 70%, therefore being able to be implemented into electroactive devices without further processing steps. Further,the local piezoelectric properties of individual electrospun fibers have been studied by piezoresponse force microscopy. Piezoelectric response, polarization switching, and nanoscale patterning of the fibers have been demonstrated.

Electroactivematerials can be taken to advantage for the development of sensors and actuators as well as for novel tissue engineering strategies. Composites based on poly(vinylidenefluoride),PVDF,have been evaluated with respect to their biological response. Cell viability and proliferation were performed in vitro both with Mesenchymal Stem Cells differentiated to osteoblasts and Human Fibroblast Foreskin 1. In vivo tests were also performed using 6-week-old C57Bl/6 mice. It was concluded that zeolite and clay composites are biocompatible materials promoting cell response and not showing in vivo pro-inflammatory effects which renders both of them attractive for biological applications and tissue engineering, opening interesting perspectives to development of scaffolds from these composites. Ferrite and silver nanoparticle composites decrease osteoblast cell viability and carbon nanotubes decrease fibroblast viability. Further, carbon nanotube composites result in a significant increase in local vascularization accompanied an increase of inflammatory markers after implantation.

The thermal and hydrolytic degradation of electrospun gelatin membranes cross-linked with glutaraldehyde in vapor phase has been studied. In vitro degradation of gelatin membranes was evaluated in phosphate buffer saline solution at 37 ºC. After 15 days under these conditions, a weight loss of 68 % was observed, attributed to solvation and depolymerization of the main polymeric chains. Thermal degradation kinetics of the gelatin raw material and as-spun electrospun membranes showed that the electrospinning processing conditions do not influence polymer degradation. However, for cross-linked samples a decrease in the activation energy was observed, associated with the effect of glutaraldehyde cross-linking reaction in the inter- and intra-molecular hydrogen bonds of the protein. It is also shown that the electrospinning process does not affect the formation of the helical structure of gelatin chains.

Poly(hydroxybutyrate) (PHB) obtained from sugar cane was dissolved in a blend of chloroform and dimethylformamide (DMF) and electrospun at 40 ºC. By adding DMF to the solution, the electrospinning process for the PHB polymer becomes more stable, allowing complete polymer crystallization during the jet travelling between the tip and the grounded collector. The influence of processing parameters on fiber size and distribution was systematically studied. It was observed that an increase of tip inner diameter promotes a decrease of the fiber average size and a broader distribution. On the other hand, an increase of the electric field and flow rate produces an increase of fiber diameter until a maximum of ~2.0 m, but for electric fields higher than 1.5 kV.cm-1, a decrease of the fiber diameter was observed. Polymer crystalline phase seems to be independent of the processing conditions and a crystallinity degree of 53 % was found. Moreover, thermal degradation of the as-spun membrane occurs in single step degradation with activation energy of 91 kJ/mol. Furthermore, MC-3T3-E1 cell adhesion was not inhibited by the fiber mats preparation, indicating their potential use for biomedical applications.

Purpose Achieving sustainability by rethinking products, services and strategies is an enormous challenge currently laid upon the economic sector, in which materials selection plays a critical role. In this context, the present work describes an environmental and economic life cycle analysis of a structural product, comparing two possible material alternatives. The product chosen is a storage tank, presently manufactured in stainless steel (SST) or in a glass fibre reinforced polymer composite (CST). The overall goal of the study is to identify environmental and economic strong and weak points related to the life cycle of the two material alternatives. The consequential win-win or trade-off situations will be identified via a Life Cycle Assessment/Life Cycle Costing (LCA/LCC) integrated model. Methods The LCA/LCC integrated model used consists in applying the LCA methodology to the product system, incorporating, in parallel, its results into the LCC study, namely those of the Life Cycle Inventory (LCI) and the Life Cycle Impact Assessment (LCIA). Results In both the SST and CST systems the most significant life cycle phase is the raw materials production, in which the most significant environmental burdens correspond to the Fossil fuels and Respiratory inorganics categories. The LCA/LCC integrated analysis shows that the CST has globally a preferable environmental and economic profile, as its impacts are lower than those of the SST in all life cycle stages. Both the internal and external costs are lower, the former resulting mainly from the composite material being significantly less expensive than stainless steel. This therefore represents a full win-win situation. As a consequence, the study clearly indicates that using a thermoset composite material to manufacture storage tanks is environmentally and economically desirable. However, it was also evident that the environmental performance of the CST could be improved by altering its End-of-Life stage. Conclusions The results of the present work provide enlightening insights into the synergies between the environmental and the economic performance of a structural product made with alternative materials. Further, they provide conclusive evidence to support the integration of environmental and economic life cycle analysis in the product development processes of a manufacturing company, or in some cases even in its procurement practices.

The main objective of the present study is to assess the environmental advantages of substituting aluminium for a polymer composite in the manufacture of a structural product (a frame to be used as a support for solar panels). The composite was made of polypropylene and a recycled tyres’ rubber granulate. Analysis of different composite formulations was performed, to assess the variation of the environmental impact with the percentage of rubber granulate incorporation. The results demonstrate that the decision on which of the two systems (aluminium or composite) has the best life cycle performance is strongly dependent on the End-of Life (EoL) stage of the composite frame. When the EoL is deposition in a landfill, the aluminium frame performs globally better than its composite counterpart. However, when it is incineration with energy recovery or recycling, the composite frame is environmentally preferable. The raw material production stage was found to be responsible for most of the impacts in the two frame systems. In that context, it was shown that various benefits can accrue in several environmental impact categories by recycling rubber tyres and using the resulting materials. This is in a significant part also due to the recycling of the steel in the tyres. The present work illustrates how it is possible to minimize the overall environmental impact of consumer products through the adequate selection of their constitutive materials in the design stage. Additionally it demonstrates how an adequate EoL planning can be an important issue when developing a sustainable product, since it can highly influence its overall life cycle performance.

Improvement of the environmental performance of processes and products is a common objective in industry, and has been receiving increased attention in recent years. The main objective of this work is to evaluate the potential environmental impact of two bedding products, a polyurethane foam mattress (PFM) and a pocket spring mattress (PSM). These two types are the most common mattresses used in Europe. A Life Cycle Assessment (LCA) shows that the PFM has a higher environmental impact than the PSM. For both products the main cause of environmental impact is the manufacturing process, respectively the polyurethane foam block moulding process for the PFM, and the pocket spring nucleus process for the PSM. A scenario analysis shows the possibility of reducing the environmental impact of the products’ life cycle using an alternative End-of-Life scenario, resorting to incineration rather than landfill. Two strategies were also studied in order to reduce the environmental impact of the PFM: (1) reutilization of foam that was sent to the waste system management, and (2) a 20% weight reduction of the polyurethane foam. The second strategy has proven to be the most effective.